DESIGN OF STEEL AND R.C.C. STRUCTURES

Preview Book

Authors Name R. R. Gadpal , D. J. Khamkar , R. B. Narahari
ISBN 13 9789389108132
Publisher Nirali Prakashan
Edition Second
Pages 206
Language English
Publishing Year Sept 2020

Email on info@pragationline.com if e-book is not found.

Select any one of below pricing option.
Add to Cart Go to Library Add to Cart Buy Now
download-app-scan
download-app
Description

Chapter 1 : Fundamental of Steel Structures                                    (Teaching: Hrs. 04, Marks 06)           

1.1    Steel as Construction Material.

1.2    Steel Structures: Towers, Roof trusses, Water Tanks, Bridges, Gantry and Crane Girders, Columns, Chimney, Building Frames etc.

1.3    Types, Grades and Strength of Steel Sections, Steel Table, IS 808-1989. Stress Strain Graph for Mild Steel.

1.4    Loads Acting on Steel Structures according to IS 875-1987 part I to IV.

1.5    Limit State Method of Design: Meaning and Types of Limit States, Loads, Design Criteria, Limit States of Strength, Limit States of Serviceability.

1.6    Factors of Safety and Load Factors as per IS 800:2007.

Chapter 2 : Design of Steel Connections                                            (Teaching: Hrs. 10, Marks 14)

2.1    Types, Uses of Bolts and Joints: Black bolts and High Strength bolts, Modes of Failure.

2.2    Specifications of Bolt Holes for Bolted Connections.

2.3    Strength of Bolt in Shear, Tension, Bearing and Efficiency of Joint.

2.4    Analysis and Design of Bolted Joints for Axially Loaded Plate, Single and Double Angle Members.

2.5    Welded Connections: Butt and Fillet Welds, Size of Weld, Throat Thickness.

2.6    Analysis and Design of Fillet Welded Joint for Plate, Single and Double Angle Members subjected to Axial Load.

Chapter 3 : Analysis & Design of Singly Reinforced Sections         (Teaching: Hrs. 14, Marks 12)

3.1    RCC: Functions of Reinforcement, Material Properties, Types of Limit States, Partial Safety Factors for Material Strength, Characteristic Strengths, Characteristic Load, Design Load as Per IS 456:2000.

3.2    Types of Loads and Combinations as per IS:875:2002

3.3    Limit State of Collapse (flexure): Assumptions, Steel, Strain Diagram and Stress-Strain Relationship for Concrete and Block Diagram for Singly Reinforced Section, Design Parameters and Constants, Ultimate Moment of Resistance.

3.4    Under-reinforced, Over-reinforced and Balanced sections.

3.5    IS Specifications regarding Spacing, Cover, Minimum Reinforcement, Effective Span in Beams.

3.6    Analysis and Design: Determination of Design Constants, Ultimate Moment of Resistance, Ultimate Load Carrying Capacity, Design of Rectangular Sections.

Chapter 4 : Design of Shear Reinforcement and Bond                     (Teaching: Hrs. 10, Marks 10)

4.1    Shear: Meaning of Shear in Beams and Slabs. IS code specifications. Various forms of Shear Reinforcement. Use of Bent-up Bars. Zones of Minimum Shear Reinforcement. Numerical Problems on Design of Shear Reinforcement in Beam.

4.2    Bond: Meaning of Bond as Per IS Code provisions. Meaning and Calculation of Development Length in Tension and Compression.

Chapter 5 : Design of Slabs                                                                    (Teaching: Hrs. 14, Marks 14)

5.1    Slabs, Support Conditions, I.S. Specifications Regarding Main Steel, Distribution Steel, Spacing and Cover for Reinforcement, Effective Span, Minimum Reinforcement.

5.2    Limit State of Serviceability for Slabs for Deflection Criteria only.

5.3    Design of One Way and Cantilever Slab including development length check only.

5.4    Design of Two-Way Slab with Four Edges discontinuous and provision of Torsion Reinforcement at Corners (As per IS 456:2000, Table no 26 case No 9 only). Check for deflection only.

Chapter 6 : Design of Axially Loaded Short Columns                        (Teaching: Hrs. 12, Marks 14)

6.1    Limit State of Collapse in Compression, Assumptions, Effective Length, Slenderness Ratio, Short and Long Columns, and Minimum Eccentricity.

6.2    IS Specifications for reinforcement in Column.

6.3    Load Analysis for a Column: Load on an Axially Loaded Column from Beams at a different Floor Levels in a Building.

6.4    Design of Axially Loaded Short Square and Rectangular Column.

6.5    Various RC Footings: Isolated and Sloped Footings, Combined Footings, Piles.

6.6    IS Specifications for Reinforcement in Footing.

6.7    Design of Isolated Square Sloped Footing: Flexure Design with checks for One-Way Shear, Two-way Shear and Bond. (Problems on Design of Footing for Bending Moment only in Theory Examination Paper)

Additional information
Weight 393 g
Dimensions 28 × 23 × 2 cm
Language

English

Semester - Year

Semester 5 (Third Year TY)

University

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “DESIGN OF STEEL AND R.C.C. STRUCTURES”

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Calculate Shipping
      Apply Coupon